Your Boat Pictures

[MIKES280]

thats the day the water went down before we new it and all the boats were stuck on the beach

[Strip Poker 388]

Heres my engine pick



Rob

[AMBUSHER]

Looking good Rob, Hows it run?

[Starflite X]

Just after finishing the Cowes race this past August.

[MIKES280]

starflite x i see you are moving to the states are you bringing the boat

[Strip Poker 388]

Originally posted by AMBUSHER
Looking good Rob, Hows it run?

So far on GPS it did 99.6 at 5800rpm .Its been to 6100 no GPS thought.This was at 768hp with the 4.5 pulley's. I havent tryed the the 4inch since we dynoed them ,Scared of breaking the drives .W/ the 4 it made 858hp and 909TQ :D Anything above 95 you have to drive it . It will chine walk on ya.

Wishng I had #6's now.

Rob:D

[Skill Saw 30]

Originally posted by Strip Poker 388
So far on GPS it did 99.6 at 5800rpm .Its been to 6100 no GPS thought.This was at 768hp with the 4.5 pulley's. I havent tryed the the 4inch since we dynoed them ,Scared of breaking the drives .W/ the 4 it made 858hp and 909TQ :D Anything above 95 you have to drive it . It will chine walk on ya.

Wishng I had #6's now.

Rob:D

sounds great,,now stop being a wuss and slap that 4" pulley on.:D do you need a stand in maniac/driver.:D
909ft/lbs of tq,,damn that crane 741 and stock gm iron heads(well,hacked ported) let you down. have to throw the dig at a couple experts.

[MIKES280]

put the small pulleys on and ease in to it don't bang it and you should be ok i just would not run them all the time but at least you can see what you got but 99 is not bad at all

[AMBUSHER]

Originally posted by Strip Poker 388
Anything above 95 you have to drive it . It will chine walk on ya.

Wishng I had #6's now.

Rob:D

Yep, they do that. Are you still running the Bmax's? If you are and they are the standard length they will slow one down for sure. If memory serves correctly they are something like 1,3/8" taller then a standard bravo not to mention heavy as chit.
Our's would run over 110mph but that was with built bravos and man did it ride HIGH. They have allot of lift. I also remember going through 8-9ddrives that summer.

[Skill Saw 30]

Originally posted by AMBUSHER
Yep, they do that. Are you still running the Bmax's? If you are and they are the standard length they will slow one down for sure. If memory serves correctly they are something like 1,3/8" taller then a standard bravo not to mention heavy as chit.
Our's would run over 110mph but that was with built bravos and man did it ride HIGH. They have allot of lift. I also remember going through 8-9ddrives that summer.

must be nice to have memories.:D :D

[Zone 5]

Originally posted by sutphen 30
must be nice to have memories.:D :D

that would be when there was a boat in the water that ran????:1innocent

[Starflite X]

Originally posted by MIKES280
starflite x i see you are moving to the states are you bringing the boat

Unfortunately no. The boat isn't mine, I just throttle it although I have mentioned to the owner that I would be happy to maintain it for him should he care to ship it to the States!!!!

Luckily, we have this waiting for us when we arrive. Bought it last June and haven't had the opportunity to use it yet.

[HCAbowman]

Lookin good Strip....sweet motors!! Lots of bling!!

[CBlakeNS]

Nice pictures!!

[Strip Poker 388]

Originally posted by AMBUSHER
Yep, they do that. Are you still running the Bmax's? If you are and they are the standard length they will slow one down for sure. If memory serves correctly they are something like 1,3/8" taller then a standard bravo not to mention heavy as chit.
Our's would run over 110mph but that was with built bravos and man did it ride HIGH. They have allot of lift. I also remember going through 8-9ddrives that summer.

Yea still have the Bmax's . They have been holding up pretty good, Dean has been taking pretty good care of me. .I havent got a pick of mine going by yet , but they do say it is out of the water Nice pick of your . :D


Rob