|
|
|
|
|
|
|
|
|
||||||||
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
06-01-2011, 12:54 PM
|
||||
|
||||
|
My Boat Headers
Hi Guys
I got a couple of request to post some pictures of the headers I built for my boat so here they are. I have built a few headers over the years and am trying to get my old flat bottom running again. I always wanted to build some merge collectors and finally took the time to build a set. It hasn't run in ten years and needs to ! I figure that there needs to be at least one flat on Lake Norman ! I will just get out my old kidney belt from back when I was racing bikes ! hahahaha Gary 
|
|
#4
06-01-2011, 01:51 PM
|
||||
|
||||
|
Thanks for the compliments guys ! Just hope that the Wild Life doesn't hate it to much. I made the collectors 4 and a half inch diameter so there is room for muffler inserts. Like I said can't wait to hear that dog BARK ! hahahahaha I have been working on it today.
Gary 
|
|
#7
06-02-2011, 05:27 PM
|
||||
|
||||
|
nice work, would love to a ride............never been in a flat b4............north end of Wylie is the perfect place for it.
__________________
Jeff 36 Outlaw "Royal Fare" F350 Powerstroke w/ Banks Riverfronthandyman.com
|
|
#8
06-02-2011, 07:33 PM
|
||||
|
||||
|
nice headers ..i bet that was a lot of work ....hey but wait a mint why is no one making fun of his headers ?? like you guys did mine his headers are on backwards just like mine
|
|
#10
06-03-2011, 07:04 AM
|
||||
|
||||
|
Boat and Ranchero
Hi Guys
Here is a old picture of the boat and my Ranchero. It is not the best picture but it is all I could find right now. This is with a different set of headers that I also made. I chopped the top on the truck three inches and have had both the truck and the boat for about thirty years and will probably use them for a coffin ! hahaha Yes the boat motor is a Ford. Thanks for the compliments ! Gary
|
|
#11
06-03-2011, 09:20 AM
|
||||
|
||||
|
is that a burns collector?the headers look great.how long did it take?
__________________
livin the dream,a mans horror story. 
|
|
#13
06-03-2011, 10:07 AM
|
||||
|
||||
|
Hi Guys
I made the collectors. I took me a couple of weeks as I made fixtures to cut the precise angles on the pieces. The parts have to fit together without any gaps since I tig welded everything together. I didn't want to go through the effort to make a die to swedge the tapered collector transition so I just rolled a cone and welded it together. I haven't fired it up yet and I am also looking forward to hearing it run again. Woopass !hahahaha Gary
|
|
|
|
|
|
Hybrid Mode
