Boatfreaks

Boatfreaks (http://forums.boatfreaks.org/index.php)
-   Poker Runs / Boat Shows / Racing (http://forums.boatfreaks.org/forumdisplay.php?f=6)
-   -   Poor Riggs! (http://forums.boatfreaks.org/showthread.php?t=30963)

Blue Oval 07-13-2014 11:10 AM

Poor Riggs!
 
2 Attachment(s)
Not to many Poker Runs you can go to and have your GM break down on a Sunday morning and have it running before noon, and that was with picking a part up in Charlevoix!:rock

Blue Oval 07-13-2014 11:10 AM

And it was fixed in a Ford Dealership!

MacGyver 07-13-2014 11:41 AM

What was the issue?

Blue Oval 07-13-2014 12:43 PM

Seal on fuel primer

jriggs 07-13-2014 04:51 PM

Bob

Thanks a bunch. By the way, what's the tow rating on that Ranger?

Blue Oval 07-13-2014 06:51 PM

4500lbs, we had it in 4 low!

drpete3 07-14-2014 07:07 AM

artie is holding the grill in place. Thx again for letting me press my hubs out Bob

Blue Oval 07-14-2014 07:33 AM

The Sunday morning productions was great! How did the props work Pete?

drpete3 07-14-2014 07:41 AM

Quote:

Originally Posted by Blue Oval (Post 570280)
The Sunday morning productions was great! How did the props work Pete?

Props are now mine and they worked awesome

s022mag 07-14-2014 10:53 AM

Quote:

Originally Posted by Blue Oval (Post 570166)
And it was fixed in a Ford Dealership!

Ford is use to fixing things:1bounce:embarrassed-smiley1:stirpot

MIKES280 07-14-2014 11:47 AM

Quote:

Originally Posted by Blue Oval (Post 570177)
Seal on fuel primer

Hell that a minor had it been a Ford you would of had to pull the cab off the frame to fix it . L o L

MMarsha 07-14-2014 11:53 AM

Quote:

Originally Posted by Blue Oval (Post 570166)
And it was fixed in a Ford Dealership!

:ev1l danc

wildthing357 07-14-2014 12:58 PM

Quote:

Originally Posted by drpete3 (Post 570284)
Props are now mine and they worked awesome

What did you end up with.

drpete3 07-14-2014 03:37 PM

Quote:

Originally Posted by wildthing357 (Post 570367)
What did you end up with.

15 5/8 diameter 32p maximus non labbed. 14pct slip rite out of the box. Now I had my family so I only did one quick pull up to 5K and backed down once I was there(rev limit is 5200). I have no idea how much trim I need but it still felt good. Most of the time I was crusing 60mph at 3500 RPM.:hijacked:

phragle 07-14-2014 05:10 PM

Quote:

Originally Posted by drpete3 (Post 570395)
15 5/8 diameter 32p maximus non labbed. 14pct slip rite out of the box. Now I had my family so I only did one quick pull up to 5K and backed down once I was there(rev limit is 5200). I have no idea how much trim I need but it still felt good. Most of the time I was crusing 60mph at 3500 RPM.:hijacked:

Still faster than me... I was running 55 on the limiter all run..
Does say something about stock merc power when you can throw it on the dash and leave it there for miles on end only backing off in the air.

Hopefully I can get the finances worked out and get a 525 built for it over the winter. Another 200 hp should really wake the little boat up.


All times are GMT -5. The time now is 07:31 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.